6316C3 NSK Open Deep Groove Ball Bearing 80mm inside x 170mm outside x 39mm wide Sealed and a 197 mm diameter

and a 197 mm diameter over chain

Outside length: 2610mm

Width: 80mm

15 mm Minimum chamfer dimension

6316C3 NSK Open Deep Groove Ball Bearing 80mm inside x 170mm outside x 39mm wide Sealed and a 197 mm diameterNSK Pressed Steel Cages Single row deep groove ball bearings are the most common type of rolling bearings. Their use is very widespread. In addition to open type bearings, these bearings often have steel shields or rubber seals installed on one or both sides and are prelubricated with grease. Also, snap rings are sometimes used on the periphery. As to cages, pressed steel ones are the most common. For big deep groove ball bearings, machined brass